19 Best Car Amplifiers Under 200 Dollars in 2022

Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Specs - Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade

Warranty - BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality

AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own

SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound

INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design

RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp

GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1000 Watts x 1 Channel <1% THD+N. - 4 Ohm: 600 Watts x 1 Channel <1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 4000 Watts x 1 Channel. - 4 Ohm: 2400 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz.

Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.

Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 100 Amp Maxi Fuse. Dimensions: (W x H x L) 9" x 2.4" x 15.5"

Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Features: Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!.

Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 200 Watts x 4 Channel <1% THD+N . - 4 Ohm:135 Watts x 4 Channel <1% THD+N. - 4 Ohm Bridged: 400Watts x 2 Channel<1% THD+N.

Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 800 Watts x 4 Channel. - 4 Ohm:540 Watts x 4 Channel. - 4 Ohm Bridged: 1600 Watts x 2 Channel. High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Optical Coupler Class “AB” Technology. Studio-Grade Bipolar Output Stage Transistors.

Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 3KHz. High Pass Filter: 15Hz - 1KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 10Hz - 50KHz. Damping Factor: >150 @ 100Hz. 35 Amp*3 ATC Fuse. Dimensions: (W x H x L) 9" x 2.4" x 21.0"

3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio

MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output

SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions

SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

This listing contains: (1) V500.2 1000 Watt 2 Channel Class A/B Amplifier

2 x 125W @ 4 Ohms 2 x 250W @ 2 Ohms 1 x 500W @ 4 Ohms

Features: Nickel Plated Terminals Low Level Inputs Low Level Outputs High Level Inputs 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable High-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V Selectable Stereo & Mono Switch 45Hz Bass Boost: 0 - 12dB S/N Ratio: > 90dB THD: 0.08%

Product Dimensions: 9.2" x 2.3" x 10" (233 x 59 x 255mm)

Max power output: 1500 Watts

Pulse Width Modulated MOSFET power supply

3-way protection circuitry (thermal, overload, and speaker short protection)

Heavy duty aluminum alloy heat-sink

4 gauge power and ground wiring is recommended for installation

Class D MOSFET Monoblock Power Amplifier

Peak Power at 1 Ohm: 1,900 Watts | RMS Power at 1 Ohm: 1,500 Watts

Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz

Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow

Stable at 1 ohm | Remote Subwoofer Level Control Included

Highly Efficient Heatsink Design allows for Maximum Reliability & Performance

📢 PEAK POWER: 2000 Watts

📢 RMS POWER: 【4 ohms: 150W x 4 chan.】【2 ohms: 250W x 4 chan.】【4 ohms bridged: 500W x 2 chan.】

📢 MARINE CERTIFIED: This 4-Channel VAD Amp includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application.

📢 FEATURES: LED indicator lighting | 3-way protection circuitry | Heavy duty aluminum alloy heat-sink | Platinum-plated RCA level inputs | Platinum-plated screw terminals | Preamp RCA outputs to daisy chain multiple amps | Selectable crossover modes

500 Watts Max Power

Automatic signal sensing and Turn-On

Hi-Volt input level control

Balanced isolator input circuit